Space-Ray Heating Solutions
Supplied and Maintained by CK Services 1990 Ltd.
About Space-Ray Heaters:
SPACE-RAY manufacture high efficiency heaters and heating solutions for a wide variety of space heating applications. As a leading expert in the heating industry with more than 50 years of experience, Space-Ray Heaters offer outstanding heating products & support that our customers can rely upon. Space-Ray is an industry leading manufacturer and supplier of high quality infrared radiant and warm air heating systems. Best known for their reliable and long lasting reputation and good build quality, making many advancements over the years in Radiant Tube technology such as the Herringbone system which was the first of its kind in the UK.
Space-Ray continue to move forward bringing innovative, reliable, fuel efficient heating solutions to the marketplace and CK Services can supply, design and install complete Space-Ray Heating Systems, as well as offer service and maintenance on all of their products so please don’t hesitate to call our office for a free quotation or to arrange a service or repair on any Space-Ray product.
Product Guides – Space-Ray
Space-Ray LRL/LRU – Single Linear and U Tube Radiant Tube Heaters
Space-Ray have been around for years in the Radiant Tube heating industry, providing some of the best technology and proving to be very reliable heaters and made in the UK. The LRL and the LRU are a safe choice when it comes to Radiant Heating and are suction heaters so the fan pulls the flame from the burner. Available in Natural and LPG gas from sizes 15Kw up to 57Kw. CE Approved.
- Six input ratings: 15kW to 47kW available in Linear and ‘U’ models
- ‘Herringbone’ link flue systems available with all ‘U’ and linear models
- Heat treated Aluminised Calorised emitter tube surface – for flake free and cleaner working environment
- Natural Gas and Propane
- Aluminium reflectors – designed to maximise downward radiant heating effect
- Lightweight construction – tubes supplied in 3m sections – easy to assemble and fit
- Efficient and cost saving heating method
- Made in the UK under our ISO9001:2008 quality assured system – all units test fired before despatch
Space-Ray LRDL Double Linear Radiant Tube Heater
Invented by Space-Ray, The double Linear Radiant Heater is a very reliable product and it combines two linear radiant tube heaters but only needs one flue between them saving the use of lots of flue systems if they was single tubes heaters. CE Approved, and made in the UK with a size range from 30Kw to 94Kw and available in Natural and LPG gas.
- Efficient and cost saving heating method, with fuel savings up to 25% when compared to warm air
- Six input ratings: 30kW to 94kW
- Heat treated Aluminised Calorised emitter tube surface – for flake free and cleaner working environment
- Natural Gas and Propane
- Aluminium reflectors – designed to maximise downward radiant heating effect
- Lightweight construction – tubes supplied in 3m sections – easy to assemble and fit
- Suction operation for increased efficiency and ease of fluing – vertical or horizontal
- Mounting heights from 2.1m to 15m. Heater lengths up to 32m
- Made in the UK under our ISO9001:2008 quality assured system, all units test fired before despatch
- Five year emitter tube guarantee
Space-Ray LRL/LRU/HB – Herringbone Radiant Tube heater
The Space-Ray Herringbone system is designed to suit a building by joining Single and U Tube Radiant heaters with one fanned flue at the end of the system. It is available in various input ranges from 14Kw up to 47Kw on Natural and LPG gas and is designed to suit the building and can be a range of sizes dependent on the layout and design. CE Approved.
- Six input ratings: 15kW to 47kW available in Linear and ‘U’ models
- ‘Herringbone’ link flue systems available with all ‘U’ and Linear models
- Heat treated Aluminised Calorised emitter tube surface – for flake free and cleaner working environment
- Natural Gas and Propane
- Aluminium reflectors – designed to maximise downward radiant heating effect
- Lightweight construction – tubes supplied in 3m sections – easy to assemble and fit
- Made in the UK under our ISO9001:2008 quality assured system – all units test fired before despatch
- Five year emitter tube guarantee
- Purpose designed radiant heating system for efficient, cost saving heating of large floor areas
Space-Ray EPA – Single Linear and U Tube Radiant Tube Heater
Space-Ray EPA is a new product and is available in Single Linear and U Tube formats from 12Kw up to 55Kw. It is a blown gas burner that can be low and high fired so it is good to the environment and energy efficient and they are quiet in operation as well so are good for car showrooms and garden centres. CE Approved.
- Eight input ratings: 12kW to 55kW available in Linear and ‘U’ models
- Single and two stage burners available
- Push through system (positive pressure)
- Heat treated Aluminised Calorised emitter tube surface – for flake free and cleaner working environment
- Natural Gas and Propane
- Aluminium reflectors – designed to maximise downward radiant heating effect
- Lightweight construction – tubes supplied in 3m sections – easy to assemble and fit
- Fan motor totally enclosed within burner box. Ideal for applications where minimal noise (less than 50dB) is desired
- Five year emitter tube guarantee
Space-Ray GIRAD – Single Burner Continuous Radiant Strip Heating
Space-Ray GIRAD is a continuous radiant strip heating system with a single burner located either inside or outside the building. Available with a total of seven input ratings from 50kW up to 300kW for wall or roof mounting. Tube diameters of 200mm and 300mm and a maximum tube length of up to 324m. For use with natural gas or LPG. A limited number of models can be used on oil. Heating modules incorporate ECOMIX air & gas modulating burners which are connected to the radiant tubes at high level and operate on a ‘closed circuit’ basis, where the products of combustion are used as the heating medium by being re-circulated through the tubes. The burner will maintain the correct temperature of the gases within the tubes in order to satisfy the temperature requirements of the space sensor or thermostat.
- Available in sizes 50KW up to 300KW
- Highly reliable: No moving parts
- High turndown ratio: Up to 10:1
- Low burner emissions
- Air damper maintains constant ‘best’ combustion efficiency from minimum to maximum output (stoichiometric combustion)
- The patented ECOMIX burner is at the heart of each Girad heating module and consists of a number of venturi Air Vein burners working within a positive pressure, high speed (7 to 15m/s) air stream
Space-Ray SUH-S+ Electric and Gas Suspended Heater
The Space-Ray SUH-S+: Efficiency, energy saving and total comfort control through unique design characteristics. An indirect gas fired unit heater with innovative burner and heat exchanger combination, provided with the latest control technology. The compact measurements and the high level of comfort make the SUH-S+ suitable for many applications in all environments such as factories, industrial units, distribution centres / warehouses, garages, showrooms, retail stores, sports centres and even in restaurants.
- Available in sizes from 10Kw up to 120 Kw
- Electric, Natural and LPG gas versions all very energy efficient
- Energy saving – up to 15% vs conventional unit heaters
- Small, Lightweight, compact design
- Variable air distribution
- Modulating pre-mix burner and fan
- Self diagnostic
- Stainless steel heat exchanger as standard
- Simple to install
Space-Ray Vortex Heating and Ventilation Unit
Available with a total of seven output ratings from 30kW up to 200kW for internal or external mounting for operation on gas, LPHW or electric. Incorporating high efficiency, low NOX pre-mix modulating burners, and EC plug fans as standard ensures high efficiency and minimum energy consumption is achieved. Gas models are available for use with natural gas (G20), or LPG (G31). LPHW models can be configured to operate on boilers or heat pumps – just let us know your water flow & return temperatures. For those applications where gas is not available, an electric version of Vortex is available. A wide range of optional equipment is available, enabling each unit to be configured to suit most applications.
- Compact nature makes Vortex ideal for replacing existing equipment
- Thermal efficiency in excess of 93.5% (ncv)
- Stainless steel heat exchanger with pre-mix burner
- Plug fan with integral inverter
- Modulating burner
- Wide airflow choice
Space-Ray Control Panels
Space-Ray Controls – SCB Range. Warm Air and Radiant Heaters with programmable chrono thermostat, suitable to operate 1 to 4 heating zones.
- For individual heater systems
- Multi-Burner (Herringbone) heater systems
- Multi-Burner (Herringbone) heater systems with Multi-Zones
Space-Ray DSF Destratifcation Fan & SR Ceiling Fan
Today, buildings tend to be well insulated, which reduces the buildings heating requirements.
However, the importance of achieving good air distribution throughout the building still remains.
A cost effective solution to achieving this is by fitting destratification fans. These fans recirculate the otherwise wasted, warm air gathering within the roof space to low level. The fitted thermostat (DSF models) automates this process. The installation of a correctly sized destratification system, pays for itself quickly due to the significant energy savings achieved. Space-Ray has 2 types of destratification fans: The DSF and a 3-blade ceiling fan – SR which has a Diameter of 1.422m.
- Extra circulation of warm air
- Reduced heat losses
- Increased comfort levels
- Energy savings
- Reduced temperature gradient between floor and ceiling
FREE Expert Advice
Do you need expert help with product selection? Contact CK Services today to arrange a FREE site survey, or for a no obligation quote to supply and install Ambirad Products.